Toshiba MA-1450-1 SERIES, EO1-11095 27 @/FOR, 50321, Required key, 50322, PK-2 Keyboard

6. PROGRAMMING OPERATIONS

EO1-11095

6.16 PLU PRESET-CODE KEY SETTING (Submode 27)

ex.) To set the following PLU Codes to KEYs on the ECR keyboard:

	Mode Lock: SET
PLU Code	27 [@/FOR].
50321	50321 [required key]
50322	50322 [required key]
	[AT/TL]

Location Code (left side); refer to REMARKS 1 and 2 below.

PLU Code assigned to the key (right side)

TEC STORE

1343 PEACH DRIVE PHONE : 87-6437

Open 8:00am to 7:00pm Closed: every Wednesday

12-19-1994 MON #3001

P27

#073 050321 #074 050322

0017

NOTES: 1. If the PLU Code entry is skipped and a [KEY] is simply depressed in the above sequence, the preprogrammed PLU Code of the KEY will be displayed.

2.A non-opened PLU Code (i.e. PLU non-existent in the PLU table file) can be set on a KEY; however, pressing the KEY in sale entries will result in an error unless the code is opened in the PLU TABLE PROGRAMMING operation, Submode 4.

3.If “0” is entered as PLU Code in the above sequence, the KEY will be closed. Pressing the closed KEY in sale entry will cause an error.

PK-2 KEYBOARD

1	11	21	31	41	51	61	71	81	91	101	111	121
2	12	22	32	42	52	62	72	82	92	102	112	122
3	13	23	33	43	53	63	73	83	93	103	113	123
4	14	24	34	44	54	64	74	84	94	104	114	124
5	15	25	35	45	55	65	75	85	95	105	115	125
6	16	26	36	46	56	66	76	86	96	106	116	126
7	17	27	37	47	57	67	77	87	97	107	117	127
8	18	28	38	48	58	68	78	88	98	108	118	128
9	19	29	39	49	59	69	79	89	99	109	119	129
10	20	30	40	50	60	70	80	90	100	110	120	130

REMARKS: 1. The Nos 1 through 130 marked on the PK-2 Keyboard are the KEY Nos to be printed on the left side of the program receipt issued in the operation on the preceding page. If each KEY is not set with a PLU Code, the auto-preset PLU Code identical to the initial KEY No. in the above figure will be active as its preset PLU Code

ex.) KEY No.1 ............. PLU Code 1

KEY No.130 ......... PLU Code 130

6-30