Toshiba EO1-11095, MA-1450-1 SERIES owner manual Head-Link Plu Sub-Link Plu, Remarks

6. PROGRAMMING OPERATIONS

EO1-11095

6.8 PLU TABLE PROGRAMMING (Submode 4)

Address No.

Description of Programming Contents

-- Continued --

10

Link-PLU Table No. (for PLU-to-PLU linking requirement only)

•This entry is useful, when the PLU item entry should always be followed by another PLU item sale. If the PLU is not applied to this case, skip this address entry. Refer to the following examples of applications:

	HEAD-LINK PLU	SUB-LINK PLU
Example 1)	PLU1: Coca-Cola	PLU2: Bottle
	Small Bottle	Deposit for the
	Net Content	small bottle
	at $0,45	at $0,05
Example 2)	PLU 101: Battery-	PLU 202: Battery
	drive Clock	Pack at $1,50
	at $20,00

As shown in the examples, this feature prevents the cashier from forgetting to enter the Sub- link PLU item attached to the Head-link PLU item.

And at the same time, in reports, two PLU Totals are separately read.

•In setting, enter the Link-PLU Table No. (1 to 99) and then depress [#].

[#]

1 to 99 (Link-PLU Table No.) The Sub-link PLU which link to the Link-PLU Table will be programmed in a separate programming operation later.

•To cancel the sub-linking, enter 0 instead of the Link-PLU Table No. before [#].

•REMARKS:

1)When the Head-link PLU is entered in a sale, the Sub-link PLU will automatically be entered. When the Sub-link PLU is an open-price PLU, the price entry and the [AMT] key depression should follow manually on the main keyboard.

This manual operation sequence cannot be replaced by a PLU Preset-code Key on the main keyboard or on the PK-2 keyboard.

2)The PLU-to-PLU linkage is effective even when the Head-link PLU is an open-price PLU.

3)The linkage is effective in a sale only for one Head-link PLU and one Sub-link PLU. If the Sub-link PLU is further programmed with another Sub-link PLUs (with a Link- PLU Table No.), the third PLU will not automatically entered.

4)It is possible to set multiple PLUs as Head-link to one Sub-link PLU. (In Example 1 described above, it may be extended to have more Head-link PLUs of similar items such as 7-up, which also link to the Bottle Deposit of the same amount.)

5)Repeat, Item Correct, Dollar Discount, Vendor Coupon, Bottle Return, %+, or %- operations are not accepted for PLU-to-PLU link entries. But Return Merchandise or Void operation is possible for the Head-link (and the Sub-link PLU will be processed as returned or voided item automatically, in this case).

6)The Sub-link PLU may be operated for sales entries, skipping the Head-link PLU, without affecting the Head-link PLU sales memory.

7)Multiplication is possible on the Head-link PLU, and then the Sub-link PLU will automatically be multiplied with the same quantity.

8)Modifier Keys (such as [SI/M]) will be effective for the Head-link PLU item only, and the modification will be disregarded for the Sub-link PLU.

9)When an error occurs at the Sub-link PLU, only the Head-link PLU is entered but not the Sub-link PLU. (Errors such as Multiplication Product Over-limit Error, the Sub-link PLU has not been opened, the sale subtotal will turn into negative, etc.)

-- Continued on next page --

6-17