Beyond the Basics | Radio Shack PRO-97 specs

Beyond the Basics

on, the scanner checks that channel every 2 seconds, and stays on the channel if there is activity until the activity stops.

Notes The priority feature does not operate while the scanner receives a trunking voice channel or during trunking

delay time. Therefore, the priority check seems random during peak hours.

If you program a weather channel as the priority channel, the scanner stays in the priority channel only when the scanner detects the weather alert tone.

This scanner cannot set a channel as the priority channel if the channel’s receive mode is MOT, ED, or LTR.

If you press PSE while the scanner receives the priority channel, the scanner displays *** PAUSED *** and stays on the priority channel even after the transmission ﬁnished.

To program a frequency in the priority channel:

1.Press MAN.

2.Use the number keys to enter the channel number which contains the frequency you want to program as the priority channel. Then press MAN again.

3.Press FUNC then PRI. The display blinks.

To program the priority channel directly:

1.Press PGM.

2.Press PRI.

3.Enter the frequency you want to enter into the priority channel, then press ENT.

To program a weather channel as the priority channel:

58

Image 58

Radio Shack PRO-97 manual Beyond the Basics

Contents

PRO-97 1,000 Channel Triple Trunking Hand Held Scanner Contents Contents ﬁnding and storing active frequencies Trunking Speciﬁcations Glossary FAQs Frequently Asked Questions WarrantyCare FCC wants you to know Your scanner’s controls ENT completes the entry of frequencies and text TUV enters an 8, or inputs characters T, U, or Basics OFF VOL/SQ turn the scanner on or off and adjust the squelch Power sources Using batteries Never install non-rechargeable batteries Charging rechargeable batteries Using AC power Basics Using vehicle battery power Connecting an earphone/headphones Trafﬁc safety Connecting an extension speakerListening safely Basics Connecting the supplied antenna Connecting an optional external antenna Basics Using the belt clip Transferring data to or from another scanner or Quick start AM modeUnderstanding your scanner’s modes Ctcss CT mode FM modeDCS DC mode Motorola mode Basics Edacs mode LTR mode Open and closed modes Basics Setting up your scanner Turning on the scanner and setting squelch Basics Storing known frequencies into channels Beyond the Basics Ctcss and DCS Beyond the Basics Storing trunking frequencies into channels DCS Code Table Storing text tags Assigning a text tag to a channel Assigning a text tag to a group ID Assigning a text tag to a bank Text input chart ﬁnding and storing active frequencies Searching a preprogrammed frequency range Band charts Search bank SR0 marine band Beyond the Basics Search bank SR1 CB band Search bank SR2 FRS/GMRS/MURS band Search bank SR3 police/ﬁre band Search bank SR4 aircraft Search bank SR5 amateur band Searching active frequencies in a rangeSearch bank SR6 programmable limit search Beyond the Basics Beyond the Basics Manually tuning a frequency Listening to the weather band Same standby mode Listening to a weather channel WX Alert and beep tone conﬁrmation Beyond the Basics Skywarn Using frequency copyCopying a frequency into a speciﬁed channel Copying a frequency into an empty channel within a bank Signal Stalker Copying a frequency into the priority channel Using Signal Stalker Using Signal Stalker II with lockout Scanning the channels Turning channel-storage banks off and on Using Ctcss and DCS Monitoring a single channel/power save circuit Deleting frequencies from channels Deleting all frequencies in a channel bank Locking out channels or frequencies Using delayLocking out channels Locking out frequencies Reviewing locked-out channelsReviewing locked-out frequencies Clearing a locked-out frequency PriorityClearing all locked-out frequencies in a search bank Beyond the Basics Changing the receive mode Using the attenuator Using the display/key backlight Turning the key tone on and off While Multi-System Trunking Scanner appears, press Beyond the Basics Using the keylock Changing the display contrast Beyond the Basics Cloning the programmed data Receives data from another scanner other than a PRO-97 Trunking How trunking works To listen to the transmission, the mode Beyond the Basics Setting squelch for trunking mode Programming trunking frequencies Beyond the Basics Programming Motorola trunking systems UHF-Lo Beyond the Basics Programming Motorola trunking systems 800 MHz Programming ﬂeet maps Block Size Code S10 S11 S12 Talk group IDs Storing talk group IDs Beyond the Basics Beyond the Basics Talk group ID hold Turning an ID sub-bank on or off Delay function in ID indication mode Locking out talk group IDs Clearing talk group IDs Reviewing locked-out talk group IDsClearing all talk group IDs in a single bank Changing the open/closed mode Care Service and repairBirdie frequencies Speciﬁcations Selectivity 25 27.995 MHz at AM mode ±5 kHz 9V DC Beyond the Basics Initializing your scanner FCC wants you to know Scanning legally Glossary FAQs Frequently Asked Questions Scanner is not working at all. What’s wrong? RadioShack Corporation