Radio Shack PRO-97 Basics Using the belt clip, Transferring data to or from another scanner or

The Basics

using the belt clip

To make your scanner easier to carry when you are on the go, use the supplied belt clip by attaching it to the back of the scanner. To remove the battery clip, slide

it upward while pulling the tab toward you.

transferring data to or from another scanner or

PC

You can transfer the programmed data to and from another PRO-97 scanner using a connecting cable which has 1/8 -inch phone plugs on both ends (not supplied). Connect the cable between each scanner’s PC/IF jacks. See “Cloning the Programmed Data”. You can also upload or download the programmed data to or from a PC using an optional PC interface kit available through your local RadioShack store.

19