Beyond the Basics | Radio Shack PRO-97 guide

Beyond the Basics

Notes

When you try to store more than 150 talk group IDs in a

bank, Memory Full! appears. Clear some talk group IDs in order to store new ones (see “Clearing Talk Group IDs”).

Follow these steps to manually store talk group IDs or to edit a stored ID.

1.Press PGM.

2.Press TRUNK.

3.To select the bank where you want to store the ID, repeatedly press FUNC then e or d until you reach the desired bank.

4.Press MODE to select MOT, ED, or LTR.

5.Repeatedly press TRUNK to select the sub-bank.

6.Press e or d to select the location where you desire to store the ID number.

7.Enter the talk group ID and press ENT. If necessary, use the decimal point for a hyphen.

8.If you want to tag the ID, press TEXT, enter the desired text tag for the ID. Then press ENT (see “Text Input Chart”).

74

Image 74

Radio Shack PRO-97 manual Beyond the Basics

Contents

PRO-97 1,000 Channel Triple Trunking Hand Held Scanner Contents Contents ﬁnding and storing active frequencies Trunking Speciﬁcations Glossary FAQs Frequently Asked Questions WarrantyCare FCC wants you to know Your scanner’s controls ENT completes the entry of frequencies and text TUV enters an 8, or inputs characters T, U, or Basics OFF VOL/SQ turn the scanner on or off and adjust the squelch Power sources Using batteries Never install non-rechargeable batteries Charging rechargeable batteries Using AC power Basics Using vehicle battery power Connecting an earphone/headphones Listening safely Connecting an extension speakerTrafﬁc safety Basics Connecting the supplied antenna Connecting an optional external antenna Basics Using the belt clip Transferring data to or from another scanner or Understanding your scanner’s modes AM modeQuick start DCS DC mode FM modeCtcss CT mode Motorola mode Basics Edacs mode LTR mode Open and closed modes Basics Setting up your scanner Turning on the scanner and setting squelch Basics Storing known frequencies into channels Beyond the Basics Ctcss and DCS Beyond the Basics Storing trunking frequencies into channels DCS Code Table Storing text tags Assigning a text tag to a channel Assigning a text tag to a group ID Assigning a text tag to a bank Text input chart ﬁnding and storing active frequencies Searching a preprogrammed frequency range Band charts Search bank SR0 marine band Beyond the Basics Search bank SR1 CB band Search bank SR2 FRS/GMRS/MURS band Search bank SR3 police/ﬁre band Search bank SR4 aircraft Search bank SR6 programmable limit search Searching active frequencies in a rangeSearch bank SR5 amateur band Beyond the Basics Beyond the Basics Manually tuning a frequency Listening to the weather band Same standby mode Listening to a weather channel WX Alert and beep tone conﬁrmation Copying a frequency into a speciﬁed channel Using frequency copyBeyond the Basics Skywarn Copying a frequency into an empty channel within a bank Signal Stalker Copying a frequency into the priority channel Using Signal Stalker Using Signal Stalker II with lockout Scanning the channels Turning channel-storage banks off and on Using Ctcss and DCS Monitoring a single channel/power save circuit Deleting frequencies from channels Deleting all frequencies in a channel bank Locking out channels Using delayLocking out channels or frequencies Reviewing locked-out frequencies Reviewing locked-out channelsLocking out frequencies Clearing all locked-out frequencies in a search bank PriorityClearing a locked-out frequency Beyond the Basics Changing the receive mode Using the attenuator Using the display/key backlight Turning the key tone on and off While Multi-System Trunking Scanner appears, press Beyond the Basics Using the keylock Changing the display contrast Beyond the Basics Cloning the programmed data Receives data from another scanner other than a PRO-97 Trunking How trunking works To listen to the transmission, the mode Beyond the Basics Setting squelch for trunking mode Programming trunking frequencies Beyond the Basics Programming Motorola trunking systems UHF-Lo Beyond the Basics Programming Motorola trunking systems 800 MHz Programming ﬂeet maps Block Size Code S10 S11 S12 Talk group IDs Storing talk group IDs Beyond the Basics Beyond the Basics Talk group ID hold Turning an ID sub-bank on or off Delay function in ID indication mode Locking out talk group IDs Clearing all talk group IDs in a single bank Reviewing locked-out talk group IDsClearing talk group IDs Changing the open/closed mode Birdie frequencies Service and repairCare Speciﬁcations Selectivity 25 27.995 MHz at AM mode ±5 kHz 9V DC Beyond the Basics Initializing your scanner FCC wants you to know Scanning legally Glossary FAQs Frequently Asked Questions Scanner is not working at all. What’s wrong? RadioShack Corporation