Beyond the Basics
2.Press the desired bank and the channel number where you want to store the frequency. The display indicates the bank and channel number. After about 1 second, the frequency to be copied flashes.
3.Press ENT. All the conditions such as receive mode and delay condition are copied onto the channel. Channel Stored! briefly appears. The scanner automatically returns to search mode.
If you try to copy a frequency which is already stored, the scanner sounds the notice tone 3 times after you press ENT. Dupl.Freq. ChXXX appears. If you want to copy the duplicate frequency anyway, press ENT, or if not, press CL to cancel.
copying a frequency into an empty channel within a bank
You can copy a frequency into a vacant channel in a specified bank when the scanner stops on the frequency during search or tune mode.
1.Press FUNC then ENT when you find a frequency you want to copy. Bank 9 Store? appears.
2.If you want to copy the frequency into bank 9, press ENT. It is stored in the first available vacant channel in the bank. Or, press your desired bank number to store, then press ENT. Channel Stored! appears for 2 seconds. All the conditions such as receiving mode and delay condition are copied on the channel. After about 2 seconds, the scanner automatically returns to search mode.
3.If you try to copy a frequency which is already stored, the scanner sounds the notice tone 3 times after you press ENT. Dupl.Freq. ChXXX appears on the third line. If you want to copy the duplicate frequency anyway, press ENT, or if not, press CL to cancel.
49
