Beyond the Basics
9.To store the next ID memory in sequence, press e and repeat Step 7.
10.Press SCAN to start scanning.
If you made a mistake in Step 4, Invalid ID value appears
Notes
and the scanner beeps when you press ENT. Start again at 
Step 3.
You can enter either a decimal or AFS code for ED (EDACS) IDs. The default setting is decimal ID entry. When you press FUNC then 2, AFS Format appears for about 2 seconds. Now you can enter the ID code with AFS format.
If you entered an ID code that is already stored in another ID channel, Dupl. ID of
75
