Locking out talk group IDs

1. Press PGM.

Notes

You can only lock out talk group IDs when the scanner is in the closed mode (see “Open and Closed Modes”).

2.Press TRUNK.

3.Press FUNC, e or d to move to the desired bank.

4.Press e or d to select the ID memory.

5.Press L/OUT to lock out the ID. lo changes to LO.

6.To remove the lockout from a trunking ID, manually select the ID memory, and press L/OUT. LO changes to lo.

You can conﬁrm the ID code while the scanner shows the text when the received signal is a voice channel.

1.Press TEXT while the scanner is receiving the voice channel and indicating the text name. The ID code appears as MOT: XXXXXX, etc.

2.Press TEXT again to cancel.

delay function in ID indication mode

You can set the ID delay function separate from the channel delay.

1.Press FUNC then ./DELAY while you are programming the trunked ID. Use Up/Down keys to set ID Delay. ENTER key saves. 2.0 seconds appears.

2.Press e or d to select None, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, or 4.0 seconds.