Raypak 266A Indoor Heater Installation, Outdoor Stack / Indoor Stack, Outdoor Stack Kit Includes

INDOOR HEATER INSTALLATION

The heater is also design-certified for indoor installation when equipped with the approved drafthood.

For Canada, indoor installation is restricted to an enclosure that is not occupied and does not directly commu- nicate with an occupied area. Refer to the latest edition of CAN/CGA-B149.1 and B149.2 for specific require- ments. Locate heater as close as is practical to a chimney or gas vent. Heater must always be vented to the out- side. See Vent Piping section (pg. 17-18) for details. Minimum allowable space is shown on the nameplate.

WARNING: Indoor heaters require a drafthood that must be connected to a vent pipe and properly vented to the outside. Failure to follow this procedure can cause fire or fatal carbon monoxide poisoning.

OUTDOOR STACK / INDOOR STACK

NOTE: The outdoor and indoor stacks are optional equipment and do not come standard with the heater.

OUTDOOR STACK KIT INCLUDES:			INDOOR STACK KIT INCLUDES:
(1)	Drafthood, painted		(1)	Drafthood, unpainted
(1) Adapter plate			(1) Adapter plate
(3)	Mounting brackets (clips)		(3)	Mounting brackets (clips)
(1) Top panel cover			(3)	Screws
(2)	1-foot sections of metal tape		(1)	Instructions
(3)	Screws	Clips
(1)	Instructions
				Clips

	OUTDOOR STACK	INDOOR STACK
Model	Part No.	Part No.
206A/207A	009834	009838
266A/267A	009835	009839
336A/337A	009836	009840
406A/407A	009837	009841

**REFER TO INSTALLATION INSTRUCTIONS INSIDE BOX FOR INSTRUCTIONS ON HOW TO INSTALL OUTDOOR/INDOOR STACK.

15