Raypak 406A, 206A, 407A, 337A, 336A, 207A Control Panel Removal, Control Adjustments - Digital Models

CONTROL PANEL REMOVAL

1.Remove (2) screws from front door. Set aside door for serviceability.

ACCESS	ACCESS
SCREWS	SCREWS

2.Remove (4) screws from sides of control panel.

3.Rotate control panel down until panel stops. Do not force.

NOTE: Caution must be used to not damage controls or wiring.

CONTROL ADJUSTMENTS - DIGITAL MODELS

Temp Adjust Buttons

Mode Button

ON

OFF

LCD Display

Fig. #9472

CONTROL ADJUSTMENTS - MILLIVOLT MODELS

The water temperature is controlled by the heater ther- mostat on the upper front panel of the heater. The control center contains an On/Off switch and one ther- mostat.

The thermostat is fitted with a means of limiting the upper temperature limit below the maximum level. The knob stop adjustment ring illustrated below is adjustable by loosening the set screw, rotating the knob stop ring to the desired location and re-tightening the set screw.

SPA TEMPERATURE	POOL TEMPERATURE
RANGE	RANGE

	Fig.# 9473
	STAND-BY
KNOB STOP RING	SET SCREW TEMPERATURE

KNOB STOP SHOWN ABOVE IS

IN THE SPA TEMPERATURE RANGE

32