Chapter 2
Basic Installation
2.2 Connecting the Hardware
Wiring The figure below shows all possible types of connection to your SpeedTouch™.
15VAC ON/OFF | 1 | 2 | 3 | 4 |
The colour coded printing on the backpanel of your SpeedTouch™ will facilitate matching the colour coded cables.
1Use the grey DSL cable to wire the SpeedTouch™ DSL port to your telephone wall outlet or distributed filter.
2Plug in the coaxial jack from the electric power supply adapter into the SpeedTouch™ ’15VAC’ port and the other end to the wall outlet.
3During the SpeedTouch™ Home Install Wizard, you will be asked to make one of following connections:
Connect the yellow
Connect the blue USB cable to the blue USB port on your SpeedTouch™ and the other end to the PC’s USB port.
For wireless networking, plug the provided SpeedTouch™110g/120g/121g or other wireless card or adapter in your computer.
If you will run the SpeedTouch™ Home Install Wizard, as described in “3.1 SpeedTouch™ Home Install Wizard” on page 16, it is recommended to wait to make these connections until the wizard will ask you to do so.
11 | |
|