Chapter 4
4 Web-Based User Interface
Embedded pages The SpeedTouch™ comes with embedded HTML pages, providing an interface to the software installed on the device. It allows easy setup and management of the SpeedTouch™ via your web browser from any PC connected to the SpeedTouch™.
Access To access the pages:
1Open your web browser.
The recommended screen resolution is 1024 by 768 pixels.
2In the address bar type your SpeedTouch™’s IP address, by default that is 192.168.1.254, and press Enter.
3Enter your SpeedTouch™ security user name and password.
The default user name is Administrator and the default password is blank.
4The SpeedTouch™’s home page will be displayed in your browser window. From here - depending on the rights of your user account - you have access to the other pages.
Tasks Amongst others you can:
View the SpeedTouch™’s current settings and status.
Configure the SpeedTouch™ to connect to your Service Provider with the settings provided.
Set the SpeedTouch™’s firewall to work with specific applications. Set up security features.
Enable remote management access. Back up your configuration settings. Reset the SpeedTouch™’s default settings. Update the SpeedTouch™’s firmware.
Using the web pages When making changes to the SpeedTouch™ configuration via the web pages, the configuration is stored automatically whenever you click the Apply button..
For more information on the embedded web pages, go to the Help link in the upper right side of the notification and navigation area of the SpeedTouch™ web pages, or refer to the SpeedTouch™ User’s Guide.
29 | |
|