
Chapter 3
Internet Access in No Time
3.2 Web-Based Easy Setup
Easy Setup With help of the Easy Setup, your Internet connection is set up in a few clicks. The Easy Setup is operating system independent.
Preconditions Make sure that:
Your SpeedTouch™ is correctly setup and turned on.
Your PC is connected to the SpeedTouch™ using wired or wireless Ethernet. In the latter case, a wireless client adapter has to be installed on your PC and correctly configured to connect to your SpeedTouch™.
Your host PC is configured as DHCP client or is configured with a valid fixed IP address.
in case of problems, you can give the host PC a fixed IP address in the same subnet as your SpeedTouch™ (If the SpeedTouch™ is in its default
settings, that is an address between 192.168.1.1 and 192.168.1.253). In case you use fixed IP addresses, the SpeedTouch™ has to be configured as DNS server (default).
Your web browser is not using a proxy server. For more information, see “ Disable proxy server” on page 40.
HTTP intercept Proceed as follows:
1Open a web browser. Browse to an arbitrary web site, for instance http:// www.speedtouch.com. As long as no Internet connection has been set up, you will be automatically redirected to the SpeedTouch™ Welcome page.
If you’re not redirected automatically, go to “ Launching the Easy Setup wizard” on page 26
2Click on Setup my SpeedTouch to launch the Easy Setup wizard.
3Continue with “ Setting up Internet connection” on page 26.
25 | |
|