Chapter 3
Internet Access in No Time
Launching the Easy
Setup wizard
Setting up Internet connection
26
It is always possible to launch the Easy Setup wizard from within the embedded web pages. Proceed as follows:
1Browse to the SpeedTouch™ pages on its IP address, its default being 192.168.1.254.
2In the menu click SpeedTouch.
3In the Pick a task... list click Set Up.
In the Easy Setup wizard:
1Click Next to proceed. If for some reason you want to abort the wizard, click
Cancel.
2Choose the Service provided by your ISP (Router or Bridge); then click Next.
3Select the appropriate VPI/VCI - and, if required, the Connection Type (PPPoE or PPPoA) - provided by your ISP; then click Next.
4Fill in the Internet Account settings (PPP user name and Password) provided by your ISP. Click Next.
5Fill in the SpeedTouch™ Security user name and Password.
The factory default user is ‘Administrator’. Its password is blank, meaning you do not need to enter anything in the password field. It is advisable to specify another Administrator user name and password to protect your SpeedTouch™ from security violation, as described in “3.4 Basic Security” on page 28.
6In the next screen you can review your settings, before to start the configuration of your SpeedTouch™. If something is missing or incorrect, click Back. To confirm the settings, click Start.
7Please wait until the configuration has been done, and then click Finish. After a while you will be returned automatically to the Welcome page. Click on the bottom link to go to the SpeedTouch™ pages or select Don’t show this page to access the Internet via your default home page.