Chapter 2

Basic Installation

Powering the

SpeedTouch™

12

To turn on the SpeedTouch™, press the power button on the SpeedTouch™ rear panel.

During the start-up procedure, the power LED on the front panel is lit red for some seconds. As soon as the power LED is solidly lit green, your SpeedTouch™ is ready for service. After another couple of seconds, also the DSL LED will light green.

If these LEDs do not light, please refer to ”Checking the LEDs” on page 33. A comprehensive LED overview can be found in the SpeedTouch™ User’s Guide.

To turn off your SpeedTouch™, press the same button.

E-DOC-CTC-20050126-0005 v1.0