Chapter 3
Internet Access in No Time
Terminating the Home | 1 | The SpeedTouch™ Home Install Wizard will configure the SpeedTouch™ and |
Install Wizard |
| your PC according to the service profile. You can follow the configuration |
|
| progress in following window: |
2Finally, click Finish to close the wizard. After some seconds, the Internet LED will be lit green. If not, refer to “5.2 LED Diagnostics” on page 33.
3You will be redirected to the embedded SpeedTouch™ pages automatically (unless you cleared the http://speedtouch.lan check box in the previous window).
These pages allow you to configure your firewall, your wireless access
point settings, and so on. More information can be found in the
SpeedTouch™ User’s Guide.
You can test your Internet connection as described in “3.3 Testing your
Internet Connection” on page 27.
IP settings The SpeedTouch™ DHCP server is enabled by default. Therefore, during the wizard the computer’s networking interface, used during the Home Install Wizard procedure is configured for obtaining its IP configuration dynamically.
For fixed IP configurations, please follow the instructions of your ISP.
20 | |
|