Chapter 3
Internet Access in No Time
3.1 SpeedTouch™ Home Install Wizard
Internet connection setup
Preconditions
Launching the Home Install Wizard
Detecting the
SpeedTouch™
With the help of the SpeedTouch™ Home Install Wizard you will be on the Internet in a flash.
First, the wizard will try to detect your SpeedTouch™. After connecting your PC, the wizard will configure your SpeedTouch™ and - if necessary - your PC.
The Home Install Wizard was designed for Microsoft Windows operating systems and Mac OS X - in the latter case provided you will use a wired connection to your SpeedTouch™.
Make sure that:
Your SpeedTouch™ is only connected to a
Your SpeedTouch™ is correctly set up and turned on. Your SpeedTouch™ is in its default configuration state.
To launch the SpeedTouch™ Home Install Wizard:
1Launch the SpeedTouch™ Setup CD.
See “2.3 The SpeedTouch™ Setup CD” on page 13 for more information.
2The SpeedTouch™ CD menu pops up.
If not, refer to ”The SpeedTouch™ CD does not start automatically” on page 36.
In the SpeedTouch™ CD menu, click Setup my SpeedTouch to start the SpeedTouch™ Home Install Wizard.
3On the Welcome page, click Next to continue.
4The Software License Agreement window appears.
You must accept before continuing. Click Yes to accept.
If you accepted this License Agreement in a previous configuration setup, this window will not be shown.
The SpeedTouch™ Home Install Wizard will check your system and will search for your SpeedTouch™ on the local network. A progress bar is displayed.
If more than one device is found, all available devices will be listed. Select your SpeedTouch™ and click Next.
16 | |
|