Wireless Device Settings | RCA 716v5 (WL) manual

Chapter 5

SpeedTouch™ Web Interface

5.6.4 Wireless Device Settings

Availability This page is only available on the SpeedTouch™716v5 WL.

Accessing the wireless device settings page

Overview

Proceed as follows:

1On the Home Network menu, click Devices.

2In the Detected Device(s), click the name of the wireless device you want to view.

The Overview page displays following information: Information allows you to view:

Status displays whether the device is currently connected to the SpeedTouch™ network.

Type displays the device type.

Connected To displays the interface to which the device is currently connected.

Allowed on LAN indicates whether the wireless client is allowed to connect to the SpeedTouch™ WLAN.

Addressing allows you to view:

Physical Address displays the MAC address of the device.

IP Address Assignment displays whether the device is using a static or dynamic IP address.

IP Address displays the current IP address of the device.

Always use the same address indicates whether the wireless client has a static DHCP lease or not.

DHCP Lease Time displays the time for which the wireless client can use this IP address.

Connection Sharing:

Gives you an overview of the games or services that are currently assigned to this device. Click the name of the game or service to view the used port mappings.

For more information, see “5.5.6 Game or Application Definition” on page 87.

Configure The Configure page allows you to: Change the device information.

Assign a static DHCP server lease to this device by selecting the Always use the same address check box.

Allow a game or service running on this device to be initiated from the Internet.

E-DOC-CTC-20050401-0008 v1.0	107

Image 115

RCA 716v5 (WL) manual Wireless Device Settings, Accessing the wireless device settings Overview

Contents

SpeedTouch716v5 WL Page SpeedTouch 716v5 WL Trademarks CopyrightDocument Information Contents Voice over IP Software Upgrade General SpeedTouch Troubleshooting 122 About this User’s Guide About this User’s Guide Your SpeedTouch Hardware Specifications Software Features SpeedTouch Features Physical interfaces Hardware Specifications Software Features Management ConfigurationVoIP SpeedTouch LED Behaviour Indicator Description Name Colour State USB Access Method Can be used to How to Access your SpeedTouch Access via the Web Interface Command Line Interface CLI Access via CLIFor more information, see Quote site command on Username Administrator Select All Programs Accessories Command Prompt Open a Command Prompt window Access via FTPFile Transfer Protocol FTP Command You can use to Common FTP commands Home/doejohn1$ftp 192.168.1.254 Connected to Remote Assistance Disabling remote access Chapter Menu select Home Network Devices Local Network Setup For more information, see Device settings on Wired Ethernet Supported operating systems USBSystem requirements Windows Found New Hardware Wizard appears Wireless Ethernet Regulatory Domain Allowed Radio Channels Wireless Basics Antennas Wireless Security on Connecting First-time Wireless Clients Click Connect Anyway Wireless Network Connection window appears Wireless device settings Name Ssid Wireless SecurityAccess Control List Network Name Ssid Chapter Click Configure Select Allowed on Wlan and click Apply Connecting Additional Wireless Clients Extending the Range of Your Wireless Network Configuring WDS Chapter Internet Connectivity Dial-In Clients See 3.1 SpeedTouch Web Pages on page 37 to proceed SpeedTouch Web Pages Terminating an Internet session Control on IGD Control AgentStarting an Internet Session Internet connection status Terminating an Internet session MS Windows XP BroadBand Connection Prerequisites Configuring a broadband connection Chapter Network and Dial-up connections YourISP Starting a broadband Internet session Click Disconnect Terminating a broadband Internet session On the Apple menu, click System Preferences Mac OS X PPPoE Dial-in ClientClick Apply Now Chapter SpeedTouch VoIP What is Voice over IPSolution Voice over IP Assign phone numbers Configure the telephony service Telephony Setup Select Service Enabled Enable the telephony service Assign phone numbersMenu select Toolbox Telephony Chapter Under Pick a task... click Use multiple identities Telephony statistics Service Description Supplementary Telephony ServicesPhone on Under Pick a task... list click Configure telephony services To use the service Proceed as follows Using the services on the phone Phone command Is used to Command overview To use the service Proceed as follows Documentation SpeedTouch Web InterfaceIntroduction SpeedTouch Menu Language Bar Navigation Bar Notification Area Tasks Navigation Toolbox MenuCollapsing and expanding the menu SpeedTouch Language Bar Navigation Bar Notification Area Tasks SpeedTouch home HomeSpeedTouch Broadband Connection Toolbox Home Network SpeedTouch Information Configuration Event Logs Update Information Pick a task... list, click Set up SpeedTouch Easy Setup Pick a task... list, click Restart Accessing the RestartRestart Restarting your SpeedTouch Configuration Restoring a previously saved configuration Backup & RestoreAccessing the Backup & Restore Saving your current configuration Reset to Factory Defaults Event Logs Indicator Description Updating the SpeedTouch system software Update Broadband Connection Internet ServicesBroadband Connection menu Click Check Connectivity Connectivity Check DSL Connection Internet Services On the Broadband Connection menu click Internet Services Internet Service SettingsAccessing the Internet Service Settings Toolbox URL Username Password Telephony Telephony services table Code Calling Line Identification PresentationCalling Line Identification Restriction Forced FXO Call Statistics Call Log Telephony Statistics Game & Application Sharing Defined Games & Applications Accessing the Defined Games & Applications Adding a Port Translation rule Accessing the Game or Application Definition OverviewConfigure Under Game or Application Definition New Game or Application Parental Control Block is selected under Action for Unknown Sites Allow is selected under Action for Unknown Sites Click Redirect in the Action list Under Content Based Filtering you are able toClick Allow in the Action list Click Standard Accessing this page Proceed as followsWeb Filtering Activation Web Filtering Activation Standard license activation Icon Description Content Level Under Pick a task..., click Create a new content level New Content LevelContent level creation Proceed as follows Content level configuration Content level definition Chapter High Firewall Intrusion Detection Dynamic DNS On the Dynamic DNS page, click Configure User Management Edit User Accessing the User Edit Editing a user accountOn the Toolbox menu, click User Management Changing the default Change Default UserUser Add User Devices Home NetworkInterfaces Devices Accessing the device settings Overview Device SettingsConnection Sharing Server, as described in 5.5.4 Game & Application Sharing on Assign Public IP Accessing the wireless device settings Overview Wireless Device Settings Availability Access Point SettingsAccessing the Access Point settings Bits, Alphanumeric Broadcast Network NameAllow New Devices Encryption New stations are not allowed Select WPA-PSK EncryptionNew stations are allowed automatically New stations are allowed via registration Accessing the WDS SpeedTouch configuration Configuring WDSUnder Pick a task..., click Scan for wireless accesspoints Interfaces Assigning a new IP address to the SpeedTouch Interface SettingsUnder IP Addresses Dhcp Pool Accessing the Dhcp PoolOn the Home Network menu, click Interfaces Dhcp Pool 116 System software upgrades Software Upgrade Introduction Starting the Upgrade Wizard Upgrade Wizard on Setup CDSee Upgrade procedure on page 119 to continue Window appears, refer to 7.1.3 Upgrade Troubleshooting on Upgrade procedure System software downgrade 120 Troubleshooting SpeedTouch does not work SpeedTouch unreachable General SpeedTouch Troubleshooting LAN LED does not light up Wired Ethernet Troubleshooting Not able to connect wireless clients Wireless Ethernet Troubleshooting Upgrade Troubleshooting UPnP on Windows XP Systems Adding IGD Discovery and Control Voice over IP Troubleshooting Hardware reset Software reset Resetting your SpeedTouch 130 Page Need more help?