RCA 716v5 (WL) Command overview To use the service Proceed as follows, Phone command Is used to

Chapter 4

Voice over IP

Command overview

56

To use the service:	Proceed as follows:
Conference Call (3 Party)	To set up a conference call:
	1	Call person A.
	2	Dial R, 2. Person A is put on hold.
	3	Wait for the dial tone.
	4	Dial the number of person B.
	5	Person B picks up the phone.
	6	Dial R, 3.
	Once the conference call has been established, you
	can:
	1	Dial R, 2 to put the 2 calls on hold.
	2	Dial R, 3 to retrieve the 2 held calls.
CLIR on call basis	It is possible to hide your phone number for one
	particular call. Dial *31* directly followed by the
	phone number of person A.
Forced FXO	To make a phone call over the regular telephone
	line:
	1	Dial *01*.
	2	Wait for the dial tone, and then dial the phone
		number of person A.

In the table below all standard service codes of the telephony services are listed. On your SpeedTouch™ these might be different, depending on your provider.

Phone command:	Is used to:
R 0	drop a held call
	reject an incoming call
R 1	terminate an active call and switch to the
	waiting or held call
R 2	put a call on hold
	switch between active and waiting or held call
	put a conference call on hold
R 3	establish a 3-way conference call
R 4	transfer a call
*31*	make an anonymous call (use CLIR) on call
	basis
*01*	use the regular telephone line

E-DOC-CTC-20050401-0008 v1.0