RCA 716v5 (WL) manual Using the services on the phone, To use the service Proceed as follows

Using the services on the phone

Chapter 4

Voice over IP

In following table the procedures are shown of how to use a telephony service. The commands are depending on your provider’s configuration, so might be different from the ones described here. For more information, see your provider’s documentation.

Make sure your phone is off hook while dialing the commands.

If your phone hasn’t got an R or another hook flash button, put down the hook for 1/2 second and then dial the command number.

E-DOC-CTC-20050401-0008 v1.0

To use the service:	Proceed as follows:
Call Hold	To put person A on hold:
	1	Dial R, 2 to put the call with person A on hold.
	2	Dial R, 1 to retrieve the call on hold.
	To put person A on hold and set up a call to person
	B:
	1	Dial R, 2 to put the call with person A on hold.
	2	Wait for the dial tone, and dial the number of
		person B.
	3	Dial R, 2 to switch back to person A. Person B
		is put on hold.
Call Waiting	You are in a phone conversation with person A
	while person B is calling you. The phone produces
	a waiting tone and - if CLIP is enabled and CLIR
	disabled - displays the number of person B on the
	display.
		To reject the incoming call, dial R, 0.
		To terminate the first call and to switch to the
		waiting call, dial R, 1.
		If you do not want to terminate the first call,
		dial R, 2 to keep the first caller on hold while
		answering the second call.
		To return to person A while putting
		person B on hold, dial R, 2.
		To return to person A while terminating
		the call with person B, dial R, 1.
Call Transfer	You receive a phone call from person A and you
	want to transfer him to person B.
	1	Dial R, 2.
	2	Wait for the dial tone.
	3	Dial the number of person B.
	4	Person B picks up the phone.
	5	Dial R, 4 to transfer the call.
	6	Hang up the phone.

55