Connections & Setup
Initial Setup
The first time you turn on your TV/VCR/DVD, you’ll be asked to set a few screens so that your TV/VCR/DVD will be set up correctly. Complete the following steps to set up your TV/VCR/DVD.
LANGUAGE
ENGLISH
ESPANOL
FRANCAIS
SELECT | / : SET | OK |
Select a Language
The first time you turn on the TV, the SELECT LANGUAGE menu appears on the screen. If you want the TV
1.Press the down arrow on the remote to highlight ESPANOL (Spanish) or FRANCAIS (French).
2.Press OK to select the language.
Note: If you need to change the language later, you can access this menu from the main MENU (Chapter 5 has details).
CONNECT ANTENNA
OR CABLE.
START AUTO CH PRESET?
YES 
OK
NO 
MENU
PLEASE WAIT
AUTO PROGRAMMING
AIR 2
STOP
OK
Automatically Searching for Channels
The next part of the initial setup asks you if you want to start AUTO CH PRESET (also called auto programming or auto channel search) – this enables the TV/VCR/DVD to search for all of the channels that are viewable through your cable TV connection or
1.If you’ve connected your antenna or cable, press the OK button on the remote (auto programming starts).
When the search is complete the TV/VCR/DVD automatically tunes to the first channel in the channel list.
Note: If the clock set screen appears, you can set the clock now or later (Chapter 5 has details).
Chapter 1 | 15 |
