RCA B27TF680 manual Loading and Playing Discs, To Load and Play a Disc

Connections & Setup

Loading and Playing Discs

Your DVD player plays DVD discs (3” and 5” discs), audio CD discs (3” and 5” discs), and CD- R/CD-RW discs recorded in MP3 format or audio format (3” and 5” discs). On CD-G and CD- EXTRA discs, only the sound can be played (no images). Before you load a disc, make sure that it is compatible with the player. The following discs CANNOT be used with this player:

•Laserdiscs

•Photo CD, CD-I, DVD-ROM, DVD-R, DVD-RW, DVD-Audio, SACD and CD-ROM

•Discs recorded using other broadcast standards (i.e. PAL or SECAM)

•Discs with unusual shapes (heart or hexagonal)

		't	Catt
			ch
	n			U
a				pp
C

This is an example of a one-sided disc.

			(Widescree
		p	nV
tc	h	U	e
			r
			s
a			i
C			)n	o
	t
		'n
		aC

This is an example of a 2-sided disc. The title is in the center.

To Load and Play a Disc

1.Press the OPEN/CLOSE button on the front of the DVD player. The disc tray opens.

2.Place a disc gently into the tray with the disc’s label facing up (double-sided discs have content on both sides, so you can place either side up).

3.Press the OPEN/CLOSE button. The disc tray closes.

4.Press the DVD button on the remote control. Then press PLAY on the front of the DVD player or on the remote.

The DVD player reads the disc’s table of contents, and then one of two things happens depending on how the disc was programmed:

•The disc starts playing.

•The disc menu appears on the screen. One of the options will start disc play. Highlight that option and press OK on the remote.

When you stop playing a disc, the player remembers where you stopped. When you start playing the disc again, the DVD player picks up where you left off unless the disc is removed, the player is unplugged, or you pressed the STOP button twice.

20 Chapter 1