Using the Remote Control
|
|
|
| ON•OFF |
| |
| ON•OFF |
|
|
|
|
|
|
|
| SAT•CABLE |
| DVD | TV |
|
|
| VCR |
| ||
SAT•CABLE |
| TV |
|
|
|
|
AUX DVD |
|
|
|
| ||
|
|
| AUDIO | AUX | ||
| GO BACK |
|
|
|
|
|
|
|
| INPUT | GUIDE | ANT•CABLE | |
VOL |
| CH |
|
|
|
|
| MUTE |
| FORMAT |
|
| INFO |
GUIDE |
| INFO |
|
|
|
|
FORMAT |
| SUB |
|
|
|
|
| CH | MENU |
|
| CLEAR | |
|
|
|
| |||
|
|
|
|
| ||
MENU |
| CLEAR |
| GO BACK |
| |
|
|
| VOL |
|
| CH |
|
|
|
| MUTE |
| |
INPUT |
| ANT•CABLE |
|
|
|
|
REVERSE | PLAY | FORWARD |
|
|
|
|
|
|
| SUBCHANNEL |
|
| SKIP |
RECORD | STOP | PAUSE | REVERSE | PLAY | FORWARD | |
|
|
|
| |||
Remote model | RECORD | STOP | PAUSE | |||
R401A1 |
| CC PRESETS | SOUND | |||
Remote model
R602A1
The darkened buttons are the device buttons that can be programmed.
Programming the Remote to Operate Other Devices
The universal remote can be programmed to operate many brands of
A second and third RCA TV can be programmed to any device button, except the TV button.
Notes: The TV button can’t be programmed on this remote to control any device; it controls only this TV.
The remote may not be compatible with all models of all brands of devices. It also may not operate all functions of your device.
Find Out If You Need to Program the Remote
To determine whether the universal remote needs to be programmed to operate one of the devices connected to your TV, such as a VCR, do the following:
1.Turn on the device (in this example, a VCR).
2.Point the remote at the device.
3.Press the corresponding device button (in this example, VCR).
4.Press ON•OFF to see if the VCR responds. If the VCR doesn’t respond, you need to program the remote to operate it.
|
|
| ON•OFF |
| |
ON•OFF |
|
|
|
| |
|
| SAT•CABLE | VCR | DVD | TV |
|
|
|
| ||
SAT•CABLE | DVD | TV |
|
|
|
AUX |
|
|
|
| |
|
|
| AUDIO | AUX |
|
GO BACK |
|
|
|
| |
|
| INPUT | GUIDE | ANT•CABLE | |
VOL |
| CH |
|
|
|
MUTE | FORMAT |
|
| INFO | |
GUIDE |
| INFO |
|
|
|
FORMAT |
| SUB |
|
|
|
| CH |
|
| CLEAR | |
|
| MENU |
|
| |
MENU |
| CLEAR | GO BACK |
| |
|
| VOL |
|
| CH |
|
|
| MUTE |
| |
INPUTANT•CABLE
REVERSE PLAY FORWARD
SUBCHANNELSKIP
Programming the Remote
There are three ways to program the remote control to operate other devices: Direct Entry, Manual Code Search, and Automatic Code Search. If you have recently purchased the device you want to control or if the device has many codes, you might want to try the manual code search first.
Using Direct Entry
1. | Turn on the device you want to control. |
2. | Look up the brand and code number(s) for the device in the code list at the end of |
| this section. |
3. | On your remote control, simultaneously press and hold the ON•OFF and MUTE |
| buttons (approximately 3 seconds) until a device button remains lit. Then release the |
| buttons. |
4. | Press and release the device button (SAT•CABLE, VCR, DVD, AUX or AUDIO) |
| you want to program. |
RECORD STOP PAUSE
REVERSE PLAY FORWARD
RECORD STOP PAUSE
CC PRESETS SOUND
5. Enter a three digit code from the code list. |
You’ll use these darkened buttons for Direct Entry.
30 | Chapter 2 |
