INSTALLATION
DURA-FLUE
TERMINATION KIT
Planning Your Dura-Flue
Installation
There are two basic types of
Note: These are the minimum pieces re- quired. Other parts may be required for your particular installation. See page 12 for a list of flue parts.
If installing termination on a siding covered wall, a vinyl siding standoff or furring strips can be used in order to ensure that the termination is not recessed into siding.
and fi ttings are used for concealed locations such as attics or where corrosion is a factor, such as above the roof line. Decorative brass trim kits are available for both wall thimbles and ceiling support boxes.
Part # | Description |
971Horiz. Termination Kit includes:
90o
nation and vertical termination. Confi rm the maximum horizontal run and maximum vertical rise from the diagrams, refer to "FluingArrange-
The vinyl siding standoff is required for walls | black elbow, wall thimble cover, |
with vinyl siding. | horiz. square termination cap, |
| 24" |
ments" section.
When planning your installation, it will be nec- essary to select the proper length of fl ue pipe for your particular requirements. For horizontal installations, determine the minimum clearance from the rear of the unit to the wall. It is also important to note the wall thickness. (The wall thimble is suitable for 2 x 4 or 2 x 6 wall construc- tion.) Select the amount of vertical rise desired for
Warning: Always maintain required clear- ances (air spaces) to nearby combustibles to prevent a fire hazard. Do not fill air spaces with insulation.
The minimum clearance requirements between the outer wall of the fl ue pipe and nearby com- bustible surfaces is
A)
B)Wall Thimble (required for combus- tible walls)
Minimum components for a
C)
The Simpson
Vertical
Terminal
Storm Collar
Part # 953
black pipe, 11"
able
black pipe
970Basic Horiz. Termination Kit includes: 90o black elbow, wall thimble cover, horiz. square
termination cap
978Vert. Termination Kit includes 0/12 - 6/12 pitch adjustable
fl ashing, storm collar, low profi le term. cap
908B 6" Pipe
907B 9" Pipe
90612" Pipe Length Galv.
906B 12" Pipe
90424" Pipe Length Galv.
904B 24" Pipe
90336" Pipe Length Galv.
903B 36" Pipe
90248" Pipe Length Galv.
902B 48" Pipe
911B
917B | 17"- 24" Adj. Pipe Length Black |
945 | 45O Elbow Galv. |
To determine the length of fl ue pipe required for vertical installations, measure the distance from the unit fl ue outlet to the ceiling, the ceiling thickness, the vertical rise in an attic or second storey, and allow for suffi cient vertical height above the roof line.
For
Do not exceed the maximum number of elbows. One 90o for horizontal terminations and two 45o for vertical termination.
DURA-FLUE FLUING
COMPONENTS
You will require the following components with your new Regency® Room Sealed Freestand- ing Gas Stove. Please review your product to make sure you have everything you need. In the efl ue that you are missing any part, contact your dealer.
Flashing |
| Vinyl Siding |
|
|
Standoff (Optional) |
|
| ||
943 or 943S |
|
| ||
| Part #950 |
|
| |
| Round |
|
| |
|
|
|
| |
Ceiling Firestop | Support Box/ |
|
|
|
(Part # 963) | Wall Thimble |
|
|
|
| (Part # 940) |
|
| AstroCap |
|
|
|
| |
Round Support |
|
| Termination Cap | |
|
| (Part# | ||
Box/Wall Thimble |
|
| ||
|
|
|
| |
(Part # 940) |
| Wall Thimble |
| |
|
|
| ||
|
| Part # 942 |
| |
Pipe Length | Adj.Pipe Length |
|
| |
| 11" - |
|
| |
| (279mm - 372mm) |
| ||
| 90o Elbow |
|
| Horizontal Kit # 970 |
|
|
| 1 | 90o Elbow |
|
|
| 1 | Wall Thimble Cover |
| 24" (610mm) |
| 1 | Astro Cap |
| Pipe Length |
| ||
|
|
|
|
12 | Regency® F39 Room Sealed Freestanding Gas Stove |