Regency U39-LP1 Installation, CONVERSION KIT# 731-969FROM NG TO LP, LPG Conversion Kit Contains

Models: U39-LP1 U39-NG1

1 44
Download 44 pages 36.34 Kb
Page 24
Image 24
CONVERSION KIT# 731-969 FROM NG TO LP

INSTALLATION

CONVERSION KIT# 731-969 FROM NG TO LP

THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER

IF IN DOUBT DO NOT DO THIS CONVERSION !!

Each Kit contains one LPG Conversion Kit and one DC Sparker Kit.

LPG Conversion Kit Contains:

Qty.

Part #

Description

3) Remove burner. See diagram below.

10) Insert a 5/32” or 4mm Allen wrench into

 

the hexagonal key-way of the screw

 

(Fig. 2), rotate it counter-clockwise until

 

it is free and extract it.

1904-529 5/32" Allen Key

1904-641 Burner Orifi ce #50

1918-590 Label "Converted to LPG"

1908-528 Red "LPG" label

1

910-037

LPG Injector

 

 

(Pilot Orifi ce)

1918-485 Instruction Sheet

DC Sparker Kit Contains:

Qty.

Part #

Description

1820-475 Bracket DC Sparker

1820-476 Bracket DC Sparker

1904-153 Washer #8 External Star

1904-330 Nut 8-32 Hex

1904-438 Plug Nylon 0.750 Hole, Black

2904-531 Bushing Split Plastic

0.500 in.

1904-543 Screw 8-32 x 3/4

Pan Head

2904-553 Screw #8 x 1/2

Type "B", Black Oxide

1910-073 Spark Generator Battery Holder

1910-074 Spark Generator Switch C/W Wire

1910-078 Battery Size AA Energizer En91

2910-199 Clip Wire Holder

1910-903 Wire Fan To Power Cord, Ground 30 in.

904-781 Velcro Hook, Black

904-782 Velcro Hook, Black

Note: Use a magnetic type screwdriver if possible.Pilot assembly is now accessible

for steps 4) to 10).

4)Open pedestal door and remove the gold chain from door which will allow door to fall.

5)Remove lighting panel by removing the 6 Phillips head screws and put to the side.

6)Remove hi-low extension knob.

7)Turn control knob to the “OFF” position.

8)Pull off the Hi/Lo gas extension knob to access the orifi ce.

Fig.2

11)Check that the screw is clean and if necessary remove dirt.

12)Flip the screw (Fig. 3).

Fig.3

13)Using the Allen wrench as shown in Fig.4, rotate the screw clockwise until snug, do not overtighten.

Installation of LPG Conversion Kit:

1)Shut off the gas supply.

2)Open the front door and carefully remove the logs and lava rock.

9) Remove the black protection cap by hand from the high-low knob

(Fig.1).Fig.4

Fig 1

24

Regency® U39 ULTIMATE Direct Vent Freestanding Gas Stove

Page 24
Image 24
Regency U39-LP1, U39-NG1 Installation, CONVERSION KIT# 731-969FROM NG TO LP, If In Doubt Do Not Do This Conversion