
OPERATION
1.Standard Equipment and Specifications
| FN20 NITRO | FN14 NITRO |
Cutting Width | 240” | 162” |
Transport Width | 115” | 106” |
Overall Width | 248” | 170” |
Overall Length | 216” | 216” |
Cutting Height | ||
Hitch | Pull | Pull |
Blade Overlap | 6” | 6” |
Blade Carrier | Reinforced Pan or Bar |
|
HP Required (Min.) | 80 HP | 80 HP |
Gearbox Rating |
| EXTRA EQUIPMENT |
Power Divider | 325 HP | Open or Closed Center |
Center Wing | 285 HP | Valve Mounting Kit |
Gearbox Limited Warranty | 5 year | Ball Hitch |
Output Shaft Diameter | Pintle Hitch (Requires Drawbar Modification) | |
Blade Tip Speed: |
| Baffle Kit Assembly |
Center 540 RPM | 16,328 FPM | Auxiliary Wheels Spindle Kit (For Dual Wheels on |
1000 RPM | 15,994 FPM | Wings) |
Wings 540 RPM | 16,328 FPM | Shredding Kit (Bar Carrier Units Only) |
1000 RPM | 15,994 FPM |
|
Cutting Capacity (Max.) | OPTIONAL EQUIPMENT | |
Driveline Size |
| Single or Double Front & Rear Chain Guards |
Main | CAT 6 HD | 540 or 1000 RPM |
Wings | CAT 6 HD | Constant Velocity or Non C/V Main Driveline |
Driveline Limited Warranty | 2 Year | Pan or Bar Blade Carriers |
Driveline Protection | Slip Clutch | Laminated, |
Deck Thickness | 10 Ga. | Plane, Implement, or Recapped Used Airplane Tire |
Side Skirts: Replaceable | or Wheel | |
Replaceable Skid Shoes | Std. Center and Wings | |
Wing Flex | 90 Degrees up, 22 Degrees Down | |
Deck Rings | Standard | Standard |
Safety Deflectors | Standard | Standard |
Tractor Static Vertical |
|
|
Drawbar Load Rating (Min.) | 3100 lbs. * | 2900 lbs. * |
Weight (Approx.) | 7745 lbs. * | 7600 lbs. * |
* With front and rear double chain guards, 6
*Safety Deflectors are standard equipment. Single and double chain guards are available as extra equipment at extra cost. Rhino recommends mowers be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agriculture purposes only and are specifically not recommended for highway,
**Ratings based on actual field performance.
*** Lowest cutting height obtained by raising side skirt and center skid shoes as described in Section 7.3.
FN20/FN14 NITRO 02/10 | Operation Section |
© 2010 Alamo Group Inc.