MAINTENANCE

TO REASSEMBLE UNIVERSAL JOINT

1.Smear grease into bearings and check for dirt.

CAUTION! Make sure all needle bearings are seated properly.

2.Insert cup and cross. Drive in with spacer.

3.Insert snap ring

4.Insert second cup and hold cross into cup. Drive cup flush with arm.

FN20/FN14 NITRO 02/10

Maintenance Section 5-9

© 2010 Alamo Group Inc.

MAINTENANCE

Page 149
Image 149
Rhino Mounts FN20, FN14 manual To Reassemble Universal Joint