Ricoh 3030 appendix Setting Thick Paper or OHP Transparencies, Press Horizontal

Getting Started

HEnter the vertical size of the paper using the number keys, and then press [#].

1

IPress [Horizontal].

J Enter the horizontal size of the paper using the number keys, and then press [#].

KPress [OK].

The paper sizes entered are dis- played.

LPress [OK].

MPress the {User Tools/Counter} key.

Setting Thick Paper or OHP

Transparencies

Note

❒Insert OHP transparencies in the K orientation.

❒The following procedures are not required if you select [Driver / Com- mand] from [Bypass Tray Setting Pri- ority] in [System] of [Printer Features]

(see p.128 “System”). In that case, set the paper size using the printer driver.

❒If you select [Machine Settings] from

[Bypass Tray Setting Priority] in [Sys- tem] of [Printer Features] (see p.128 “System”), the settings made using the control panel have priority over the printer driver settings.

❒If the printer driver is not used, se- lect [Machine Settings] from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see p.128 “Sys- tem”). Set the paper size using the control panel.

Reference

For printer driver settings, see Printer Driver Help.

A Press the {User Tools/Counter} key on the control panel.

BPress [System Settings].

CPress the [Tray Paper Settings] tab.

DPress [TNext] to scroll through the list.

EPress [Paper Type: Bypass Tray].

FSelect [OHP] or [Thick Paper].

GPress [OK].

The paper type selected is dis- played.

HPress the {User Tools/Counter} key.

Note

❒The settings made will remain valid until they are reset again. After printing on OHP trans- parencies or thick paper, make sure to clear settings for the next user.

16