Ricoh 3030 appendix Follow the on-screen instructions

Installing the Printer Driver Using IEEE 1394 (SCSI print)

JFollow the on-screen instructions.

When installation is complete, the printer connected to “1394_00n” appears in the [Printers] window: (“n” shows the number of printers connected.)

Note

❒If the printer driver has already been installed, the printer icon is added to the [Printers] window. In this case, printer driver installation is not necessary.

❒ If printing does not work properly after the installation, delete the port and 2

reinstall the printer driver. For details, see p.151 “The Machine Does Not Print”.

❒If you do not want to install the printer when Found New Hardware Wiz- ard starts under an operating system that supports SCSI print, disable the device by following the procedure below.

A When the [Found New Hardware Wizard] dialog box appears, click [Next >].

B When the message “This wizard will complete the installation for this Device: Unknown” appears, select the [Search for a suitable driver for my device [recommended]] check box, and then click [Next >].

C When the message “Please choose your search and installation option.” appears, clear all check boxes from [Search for the best driver in these loca- tions.], and then click [Next >].

D When the message “Driver Files Search Results” appears, select the [Dis- able the device. The Add/Remove Hardware Wizard in the control Panel can be able to complete the driver installations.] check box, and then click [Finish].

49