Ricoh 3030 appendix 155

	Troubleshooting
Problem	Causes and Solutions
When using Win-	Make sure the application's paper size and orientation settings match those
dows 95 / 98 / Me	of the printer driver.
/ 2000 / XP, Win-	If a different paper size and orientation are set, select the same size and ori-
dows Server 2003,
	entation.
or Windows NT
4.0, combined
printing does not
come out as ex-
pected.
When using Win-
dows 95 / 98 / Me
/ 2000 / XP, Win-
dows Server 2003,
or Windows NT
4.0, Auto Re-
duce/Enlarge
print does not
come out as ex-
pected.
A print instruc-	User Authentication may have been set. Consult the appropriate adminis-
tion was issued	trators.
from the comput-
er, but printing
did not start.
The print job is not	Even when the machine is offline, printing is performed when [Job Accep-
canceled even	tance Priority] has been set in [Parallel Interface] in the [Interface Settings] in the
when the machine	System Settings menu. Change the setting of Signal Control to Printer pri-
is switched to of-	ority.
fline status.	See “User Tools (System Settings)”, General Settings Guide.
Photo images are	Some applications reduce print resolution.
coarse.
Fine dot pattern	Make the following settings with the printer driver:
does not print.	• Change the [Dithering:] setting on the [Image Adjustments] tab in the
	[Change User Settings...] dialog box on the [Print Quality] tab in the RPCS
	printer driver.

Note

❒To enable [Change User Settings...], select the [User settings] check box. See the printer driver Help.

Images are cut off,	You may be using paper smaller than the size selected in the application.
or excess is print-	Use the same size paper as that selected in the application. If you cannot
ed.	load paper of the correct size, use the reduction function to reduce the im-
	age, and then print.
	See the printer driver Help.

8

155