Ricoh 3030 appendix Deleting Sample Print Files, Press Delete

Other Print Operations

H Enter the new number of sets us- ing the number keys.

If you do not want to change the set quantity, proceed to step I.

	Note
	❒ You can enter up to 999 sets.
4	❒ Press {Clear/Stop} to correct any
	entry mistakes.

❒When multiple files are selected without setting a quantity, 1 page less than the minimum number of all settings is ap- plied.

❒When the number of set quanti- ty is changed, the changed quantity is applied to all select- ed files.

IPress [Yes].

The remaining sets are printed.

Important

❒When printing is completed, the stored file is deleted.

Note

❒Press [No] to cancel printing.

❒To stop printing after printing has started, press [Exit], and then press [Job Reset]. The file is deleted.

❒Remaining print jobs are print- ed before the Sample Print job.

Deleting Sample Print Files

If you are not satisfied with the sam- ple printout, you can delete the Sam- ple Print file, revise it and print it again until the settings are suitable.

A Press the {Printer} key to display the Printer screen.

BPress [Print Jobs].

A list of print files stored in the ma- chine appears.

CPress [Sample Print Job List].

A list of Sample Print files stored in the machine appears.

Note

❒Depending on the security set- tings, certain print jobs may not be displayed.

D Select the file you want to delete by pressing it.

EPress [Delete].

The delete confirmation screen will appear.

F Press [Yes] to delete the file.

After the file has been deleted, the file list screen will return.

Note

❒If you do not want to delete the file, press [No].

88