Ricoh 3030 appendix Windows XP, Windows Server

Preparing the Machine

Windows XP, Windows Server 2003

Important

❒SCSI print must be set to “active” from the control panel. For details, see Net- work Guide.

❒Installing this printer driver requires Administrators permission. Log on us-

2ing an account that has Administrators permission.

Note

❒This machine can receive print data from one computer at a time only. If a job from a computer collides with other data, a message may appear on the com- puter.

❒To install another printer driver after setting the “1394_00n” port, click [1394_00] as a port during the printer driver installation.

❒When the printer driver is properly installed, connecting or disconnecting the optional IEEE 1394 cable causes the printer icon to change.

A Connect the machine to the computer using the IEEE 1394 interface cable.

When the [Found New Hardware Wizard] dialog box appears, check that [This wiz- ard helps you install software for: (Unknown)] is displayed.

B Select the [Install from a list on specific location (Advanced)] check box, and then click [Next >].

CWhen the message “Please choose your search and installation option.” ap- pears, select the [Search for the best driver in these locations.] check box, select the [Include this location in the search:] check box, and then select the [Include this location in the search:] check box.

DInsert the CD-ROM into the CD-ROM drive.

Note

❒If Auto Run starts, click [Cancel], and then [Exit].

❒To disable Auto Run, press the left {Shift}key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.

50