Ricoh 3030 appendix Click Detailed Settings to make necessary settings

Using the SmartDeviceMonitor for Client Port

L In the [Printer URL] box, enter “http://printer's address/printer” as the print- er's address.

If the server authentication is issued, to enable SSL (a protocol for encrypted communication), enter “https://printer's address/printer” (Internet Explorer 5.01, or a higher version must be installed).

(example IP address: 192.168.15.16)

http://192.168.15.16/printer
	2
https://192.168.15.16/printer

You can enter “http://printer's address/ipp” as the printer's address.

M Enter a name for identifying the printer in [IPP Port Name]. Use a name dif- ferent from the one of any existing port.

If a name is not specified here, the address entered in the [Printer URL] box be- comes the IPP port name.

NClick [Detailed Settings] to make necessary settings.

For information about the settings, see SmartDeviceMonitor for Client Help.

O P Q

Click [OK].

Check that the port of the selected printer is displayed in [Port:].

Set a user code, if necessary.

This allows a SmartDeviceMonitor for Admin user to display and check the number of sheets each user prints. For details, see SmartDeviceMonitor for Admin Help.

Up to 8 numeric characters can be entered. No alphabetic characters or sym- bols can be entered.

R S

Select the [Default Printer] check box to configure the printer as default.

Click [Continue].

Installation starts.

T Click [Finish] in the installation completion dialog box.

A message about restarting the computer may appear. Restart the computer to complete installation.

Note

❒To stop installation of the selected software, click [Cancel] before installa- tion is complete.

Reference

A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See p.55 “If a Message Appears during Installation”.

27