Ricoh 3030 appendix Check the location, and then click Next, Rpcs

Preparing the Machine

H Specify the location where USB Printing Support is located, and then click [Next >].

If the CD-ROM drive is D, the source files of USB Printing Support are stored in the following location:

D:\DRIVERS\USBPRINT\WIN98ME

ICheck the location, and then click [Next >].

2USB Printing Support is installed.

JClick [Finish].

If the printer driver has already been installed, plug and play is enabled, and the icon of the printer connected to the “USB001” port is added to the [Printers] window.

KClick [Next >].

L Click [Search for the best driver for your device. [Recommended]], and then click [Next >].

M

N

Select the [Specify a location:] check box, and then click [Browse...].

The [Browse for Folder] dialog box appears.

Insert the CD-ROM into the CD-ROM drive.

Note

❒When Auto Run starts, click [Exit].

❒To disable Auto Run, press the {Shift} key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.

O Specify the location where the source files of the printer driver are stored, and then click [Next >].

If the CD-ROM drive is D, the source files of the printer driver are stored in the following location:

•RPCS

D:\DRIVERS\RPCS\WIN9X_ME\(Language)\DISK1

•PCL 5e

D:\DRIVERS\PCL5E\WIN9X_ME\(Language)\DISK1

•PCL 6

D:\DRIVERS\PCL6\WIN9X_ME\(Language)\DISK1

•PostScript 3

D:\DRIVERS\PS3\WIN9X_ME\(Language)\DISK1

PCheck the location, and then click [Next >]. Add Printer Wizard starts.

40