Turning On the Power
Turning Off the Main Power
Turn off the main power as follows:
Important | 1 |
❒If the machine's operation switch is lit or flashing, do not turn off the ma- chine's main power switch. Doing so might damage the hard disk or memory, leading to malfunctions.
❒When the machine finishes printing, it covers its print heads. Before turning the machine off, allow the machine 10 seconds to cover its print heads after finishing printing.
❒Make sure to turn off the main power switch before pulling out the power plug. Not doing so may result in damage to the hard disk or memory, leading to malfunctions.
A B
Make sure the On indicator is not lit.
Turn off the main power switch at the back of the machine.
The main power indicator goes out.
Note
❒When the main power switch is turned off while using the fax function, waiting fax and print jobs may be canceled, and incoming fax documents not received. If you have to turn off this switch for some reason, keep the following points in mind:
❒Make sure 100% is shown as available memory on the screen before turn- ing off the main power switch or unplugging the power cord. Fax files in memory are deleted an hour after you turn off the main power switch or unplug the power cord. See “Turning Off the Main Power / In the Event of Power Failure”, Troubleshooting.
❒The On indicator does not go off, but flashes in direct dialing mode even if you press the Operation switch. When this happens, check the items be- low, and turn off the main power switch.
•the computer is not controlling the machine.
•the machine is not receiving a fax.
27
