Ricoh 615C appendix Job Information key scanner

Getting Started

30.Quick Dial Flip Plate

Tilt the plate downward to change from

	{Quick Dial 01} key to {Quick Dial 16} key.
	Tilt the plate upward to change from
1	{Quick Dial 17} key to {Quick Dial 32} key.
	31. {Job Information} key (scanner
	and facsimile mode)

Press to obtain status information on transmitted data.

34.{Memory Trans} key (facsimile mode)

Press to carry out memory transmission. See “Memory Transmission”, Facsimile Reference.

35.{Resolution} key (facsimile mode)

Press to specify the resolution of the fax. See “Resolution”, Facsimile Reference.

32.{On Hook Dial} key (facsimile mode)

Press this to hear dial and data tones on the fax line while dialing, as if the hand- set were off the hook. For details, see “On Hook Dial”, Facsimile Reference.

33.{Pause/Redial} key (facsimile mode)

•Pause: Press to insert a pause in a fax dialing sequence. You cannot insert a pause at the beginning of a sequence. The pause is indicated by “-”. For de- tails, see “Entering a pause”, Facsimile Reference.

•Redial: Press this to select a recently- dialed destination. For details, see “Redial”, Facsimile Reference.

Reference

p.19 “Display”

p.24 “Turning On the Power”

p.29 “Entering Text”

36.User Function keys (facsimile mode)

You can assign frequently-used functions to these keys. See “General Settings/Ad- just”, General Settings Guide.

By default, the following functions are registered:

{F1} key: Start manual reception

{F2} key: Switch reception mode

{F3} key: Transmission stamp

18