Changing Modes
23
1
Changing ModesNote
❒You cannot switch modes during initial setup.
❒The copying screen is displayed as default after power on. You can change
this default setting. For the setting procedure, see “Function Priority”, Gener-
al Settings Guide.
❒If the Function Upgrade Option is not installed, only TWAIN scanning is
available.
❒The following illustrations show screens that appear if the Function Upgrade
Option is installed.
❖System Reset
The screen specified in Function Priority appears automatically after a certain
period of time has elapsed. This function is called “System Reset”. You can
change the System Reset time in “System Auto Reset Timer”, General Settings
Guide.
AMA066S