Cleaning the Printer

Cleaning the Friction Pad

If the friction pad is dirty, a multi-feed or a misfeed might occur. In this case, clean the pad as follows:

A Lift the paper tray slightly, and then pull it out until it stops. Lift the front side of the tray, and then pull it out of the printer.

B Place the tray on a flat surface. When there is paper in the tray, remove paper.

C Wipe the brown part of the friction pad with a soft damp cloth. Then, wipe it with a dry cloth to remove the water.

Do not use chemical cleaner or organic solvent such as thinner or ben- zene.

61