Troubleshooting

Messages/Second

Description

Solution

messages

 

 

 

 

 

Hardware Problem

The printer identified an IEEE

Turn the power off, and then on.

IEEE1394

1394 interface board error.

Remove and re-install the IEEE 1394

 

 

 

interface board correctly.

 

 

A Check the IEEE 1394 interface

 

 

board is correctly attached to the

 

 

computer.

 

 

B Check the IEEE 1394 interface ca-

 

 

ble is securely connected.

 

 

C Unplug the IEEE 1394 interface

 

 

cable which is connected to the

 

 

printer.

 

 

D Restart the computer. If the mes-

 

 

sage appears even after executing

 

 

above operation, proceed to the

 

 

following steps.

 

 

E Execute the utility tool for IEEE

 

 

1394 interface board that is stored

 

 

in the following path in the CD-

 

 

ROM labeled “Printer Drivers and

 

 

Utilities”: UTILITY\ 1394

 

 

❒ For details about using the utility

 

 

tool for IEEE 1394, see the RE-

 

 

ADME file in the same directory in

 

 

the CD-ROM. If the message ap-

 

 

pears again, contact your sales or

 

 

service representative.

 

 

See “Attaching 1394 Interface Unit

 

 

Type 4510”, Setup Guide.

 

 

 

Hardware Problem

The printer identified an option-

Turn the power off, and then on. Re-

Option RAM

al RAM error.

move and re-install the optional RAM.

 

If the message appears again, contact

 

 

 

 

your sales or service representative.

 

 

See “Attaching Memory Unit Type C

 

 

256MB (SDRAM Module)”, Setup

 

 

Guide.

 

 

 

 

 

Turn off the power, remove the Mem-

 

 

ory Unit, and then turn on the power.

 

 

❒ If you remove the Memory Unit,

 

 

you must set up the option with the

 

 

printer driver.

 

 

❒ In this case, you might not be able

 

 

to print complex print jobs.

 

 

 

77