
Cleaning the Printer
Cleaning the Registration Roller
If the registration roller is dirty, a misfeed might occur. In this case, clean the roller as follows:
•Be sure to turn off the power and wait for about 30 minutes before cleaning the registration roller. Not waiting for the printer to cool down can result in a burn.
•The inside of this printer becomes very hot. Do not touch parts labelled “v” (indicating a hot surface). Touching these parts will result in burns.
Clean the registration roller if dots (caused by specks of paper stuck to the roller) appear on printed OHP transparencies.
A Turn off the power, and then unplug the power cable.
B Open the front cover by pushing the front cover release button.
C Pull the toner cartridge out of the printer by holding the grips of the car- tridge.
❒Do not hold the toner cartridge upside down or stand it vertically.
67