Ricoh AP610, AP610i, AP610N, G1168610A 80

Troubleshooting

	Messages/Second	Description	Solution
	messages

	Ready	The default ready message.	No action required.
		The printer is ready to use.

	Remove Misfeed	There is misfeed in the Duplex	Remove the misfed paper.
	Duplex Unit	Unit.	See p.104 “When “Remove Misfeed
	Duplex Unit		See p.104 “When “Remove Misfeed
	/ Open Duplex		Duplex Unit” Appears”.
	/ Open Duplex
	Unit Cover

	Remove Misfeed	There is a misfeed in the print-	Remove the misfed paper.
	Internal Path	er.	See p.96 “When “Remove Misfeed In-
	Internal Path		See p.96 “When “Remove Misfeed In-
	/ Open		ternal Path” Appears”.
	/ Open
	Front Cover

	Remove Misfeed	There is a misfeed in the paper	Remove the misfed paper.
	Paper Exit Cover	exit cover.	See p.99 “When “Remove Misfeed
	Paper Exit Cover		See p.99 “When “Remove Misfeed
	/ Open Paper		Paper Exit Cover” Appears”.
	/ Open Paper
	Exit Cover

	Remove Misfeed	Paper is jammed in the speci-	Remove the misfed paper.
	Paper Tray	fied input paper tray.	See p.94 “When “Remove Misfeed
	Paper Tray		See p.94 “When “Remove Misfeed
	/ Pull out Tray		Paper Tray” Appears”.
	/ Pull out Tray

	Remove Paper	The standard tray is full, and	Remove paper from the standard tray,
	Standard Tray	the print job is suspended.	and the print job will be resumed auto-
	Standard Tray		matically.
			matically.

	Replace	It is time to replace the mainte-	Replace the new maintenance kit.
	Maintenance Kit	nance kit (friction pad, paper	See p.44 “Replacing the Maintenance
	Maintenance Kit	feed roller, transfer roller and	See p.44 “Replacing the Maintenance
		feed roller, transfer roller and	Kit”.
		fusing Unit).	Kit”.
		fusing Unit).

	Replace	The toner cartridge is not set	Set the toner cartridge correctly.
	Toner Cartridge	correctly or toner is almost run	See p.39 “Replacing the Toner Car-
	Toner Cartridge	out.	See p.39 “Replacing the Toner Car-
		out.	tridge”.
			tridge”.

		The toner dust is full.	Prepare a new toner cartridge. If the
			image density gets too light, replace
			the toner cartridge with a new one.
			See p.39 “Replacing the Toner Car-
			tridge”.

	Reset Duplex	A communication error sent	Set the duplex unit correctly. If the
	Unit correctly	from the system unit to the du-	problem persists, call your service
	Unit correctly	plex unit.	provider.
		plex unit.	provider.

80

Contents

Maintenance Guide Cleaning the Printer Cautions to Take When Cleaning Cleaning the Registration Roller Adjusting the Printer Troubleshooting Error & Status Messages on the Control Panel Trademarks How to Read This Manual Paper and Other Media Supported by This Printer ❖Input Paper Sizes (Metric version) See p.25 “Loading Paper in the Bypass Tray”See p.32 “Loading Envelopes” ❖Input Paper Sizes (Inch version) Page ❖Paper weight and number of sheets to be set ❖Paper size not supported by both side printing Paper Recommendations Loading Paper Storing Paper Types of Paper and Other Media Plain Paper Thick Paper OHP transparencies Envelopes Paper not supported by this printer Print Area ❖Paper ❖Envelope Page Loading Paper Loading Paper in Tray 1 and the optional paper feed unit Page Changing the paper size D Slide the catches inwards to unlock the tray E Slide the tray until it stops F Return the catches to their original positions Page If you load a paper size that is not selected automatically Specifying custom size paper for the optional paper feed unit Custom Size: Horiz. 8.27 “ Specifying a paper type for paper tray and the optional paper feed unit Loading Paper in the Bypass Tray Opening and Closing the Bypass Tray Open the bypass tray Close the bypass tray Specifying standard size paper for the Bypass Tray B Adjust the side guides to the paper width Bypass Size: *11 x 8 1/2 Specifying custom size paper for the Bypass Tray Specifying a paper type for the Bypass Tray Bypass Tray: Thick Paper Loading Envelopes Loading envelopes onto the Bypass Tray Bypass Size: C5 Env(162x229) Loading envelopes into the Envelope Feeder Unit Page Page Page Switching between Paper Trays Replacing the Toner Cartridge A Open the front cover by pushing the front cover release button B Be sure to put the toner cartridge on a stable, flat surface Page Page Page Replacing the Maintenance Kit Before Replacing Replacing the Friction Pad Page Replacing the Transfer Roller Page Page Replacing the Paper Feed Rollers Page Page Replacing the Fusing Unit Replacing the fusing unit Page Page Page Replacing the fusing unit with the duplex unit attached Page Page Cautions to Take When Cleaning Cleaning the Friction Pad Page Cleaning the Paper Feed Roller Page Page Page Cleaning the Registration Roller Page G Close the front cover by pressing the left and right side indentations Adjusting the Image Density Page Adjusting Tray Registration Adjustment: Horiz: Tray Horiz: Tray 2: (-4.0+4.0) Registration: Adjustment Error & Status Messages on the Control Panel ❖Messages (in alphabetical order) Page Page Page {# Enter} key Form Feed Online Page Page the [Ready] Printer Does Not Print terface cable ❖ Network Connection ❖ Ad hoc Mode or 802.11 Ad hoc Mode ❖ Infrastructure Mode Checking the port connection Windows 95/98/Me Windows Windows XP Professional, Windows Server Windows XP Home Edition Windows NT Other Printing Problems [Maintenance] menu Output are not delivered Check the paper size settings. The size selected with the paper to the selected tray you require [Font Priority] printing speed may decrease, two-sidedprinting may be canceled or a job reset may occur during continuous print ing • If the entire image is not printed out properly even after chang The paper size appears on the control panel and printing is not performed place the indicated size in the paper tray, or perform Form Feed with PDF Direct Print Additional Troubleshooting Page Removing Misfed Paper When “Remove Misfeed Paper Tray” Appears Page When “Remove Misfeed Internal Path” Appears Page F Close the front cover by pressing the left and right side indentations When “Remove Misfeed Paper Exit Cover” Appears Removing misfed paper from the exit cover Removing misfed paper from the fusing unit Page Page Page When “Remove Misfeed Duplex Unit” Appears Removing the misfed paper inside the cover Page Page Page Moving and Transporting the Printer Moving the Printer Moving the printer in the short distance D Lift the printer and move it to the place where you want to install it E If you removed options, reinstall them Consumables Toner Cartridge Maintenance Kit ❖Maintenance Kit Type Page Specifications Mainframe ❖Configuration: ❖Print Process: ❖First Print Speed: ❖Paper size: ❖Paper Weight: ❖Media Type: ❖Power Source: ❖Power Consumption: ❖Weight: ❖Warm-upTime: ❖Paper Capacity: ❖Paper Output Capacity: ❖Memory: Options Paper Feed Unit Type ❖Dimensions (W⋅D⋅H): ❖Paper Size: Envelope Feeder Type Memory Unit Type C 256MB ❖Module Type: ❖Memory Type: ❖Number of Pins: 1394 Interface Unit Type ❖Protocol: ❖Data Transfer Speed: ❖Frequency Range: ❖Transmittable Distance: ❖Transmission Mode: