Troubleshooting

Messages/Second

Description

Solution

messages

 

 

 

 

 

Invalid Password

The password entered using

Enter the correct password using the

Try again

the control panel is not correct.

control panel.

 

 

 

 

 

Load Correct

The paper size setting on the

Load { paper size } paper of the select-

Size Paper

tray differs from that of actual

ed feed direction and paper size into

paper size in the tray.

the tray. Printing will not automatically

/ Press #

 

resume if the paper size and direction

to continue

 

 

setting is incorrect. Make sure that the

 

 

paper feed directions set in the printer

 

 

driver and on the control panel are the

 

 

same. There are two methods to re-

 

 

sume printing.

 

 

A Use the control panel to set the

 

 

correct paper size and direction of

 

 

the paper in tray. Then Press the

 

 

{# Enter} key .

 

 

B Press {Form Feed} and select the

 

 

tray with the control panel.

 

 

 

Load Paper

The paper type and size set-

Load paper into the tray indicated,

or Form Feed

tings for this tray do not match

then press the {# Enter}key to resume

/ Paper Size:

the size and type of paper actu-

printing. Or press {Form Feed} and se-

ally loaded.

lect the tray that holds a different type

Paper Type:

 

of paper. To cancel printing, press

 

 

{Job Reset}. Then Press the {# Enter}

 

 

key .

 

 

 

Load Paper:Tray #

There is no paper left in this

Load paper into the tray indicated.

or Form Feed

tray.

 

 

 

/ Paper Size:

#: tray number

 

 

 

Paper Type:

 

 

 

 

 

Menu Protected

The menu is protected and the

Wait for two seconds until the previ-

Cannot change

settings cannot be changed.

ous display appears.

 

 

 

 

 

No Files exist

There are no files available for

Wait for two seconds until the previ-

 

the sample print job or the

ous display appears.

 

locked print job.

 

 

 

 

Offline

The printer is offline and cannot

Press {Online} key.

 

print data.

 

 

 

 

P= XX I= XXXXXXXX

A controller error. The SC num-

Turn the power off, and then on. If the

Power Off On

ber indicates the problem.

message appears again, call your

 

sales or service representative.

/ If Error Reoccur

 

 

 

Call Service

 

 

 

 

 

Processing...

Print data is being processed.

Wait a while.

 

 

 

RC Gate

Cannot communicate with RC

Check the device or the RC Gate net-

connection error

Gate.

work connection.

 

 

 

 

 

79