Manuals / Brands / Computer Equipment / Printer / Ricoh / Computer Equipment / Printer

Ricoh AP610, AP610i, AP610N, G1168610A Checking the port connection, SPP, HCRP, BIP, 1 (n) is the number of printers connected, •For a USB port connection, port USB00 (n) 1should be set

1 117

Download 117 pages, 2.23 Mb

Troubleshooting

Possible Cause	Solutions

When you use the optional	SPP
Bluetooth interface unit.	A Make sure the machine you want to use appears in the 3Com
	A Make sure the machine you want to use appears in the 3Com
	Bluetooth Connection Manager.
	B Make sure “Bluetooth Serial Client (COMx)” appears under Cli-
	ent Ports in the 3Com Bluetooth Connection Manager.
	C Restart computer, this printer, and the other devices.
	D Make sure no IEEE 802.11b (wireless LAN) or other Bluetooth
	devices are in use.
	❒ Interference may occur with the IEEE 802.11b wireless
	LAN interface board. Such interference may affect the
	transmission speed and other functions.
	E Transmissions between computers, other devices, and this
	printer can be blocked by obstructions. Move this printer, com-
	puters, and other devices, if necessary.
	HCRP, BIP
	A Restart the computer, this printer, and other devices.
	B Make sure no IEEE 802.11b (wireless LAN) or other Bluetooth
	devices are in use.
	❒ Interference may occur with the IEEE 802.11b wireless
	LAN interface board. Such interference may affect the
	transmission speed and other functions.
	C Transmissions between computers, other devices, and this
	printer can be blocked by obstructions. Move this printer, com-
	puters, other devices, if necessary.

If printing still does not start, contact your sales or service representative. Consult with the store where the printer was purchased for information about the location of sales or service representatives.

Checking the port connection

When the printer is directly connected via the PC cable and the data-in indicator does not flash or light up, the method of checking the port connection is as fol- lows.

•For a parallel port connection, port LPT 1 or LPT 2 should be set.•For a USB port connection, port USB00 (n) *1 should be set.•For a IEEE 1394 (SCSI print) port connection, port 1394_00(n) *1 should be set.*1 (n) is the number of printers connected.

84

Contents

Maintenance Guide Cleaning the Printer Cautions to Take When Cleaning Cleaning the Registration Roller Adjusting the Printer Troubleshooting Error & Status Messages on the Control Panel Trademarks How to Read This Manual Paper and Other Media Supported by This Printer ❖Input Paper Sizes (Metric version) See p.25 “Loading Paper in the Bypass Tray”See p.32 “Loading Envelopes” ❖Input Paper Sizes (Inch version) Page ❖Paper weight and number of sheets to be set ❖Paper size not supported by both side printing Paper Recommendations Loading Paper Storing Paper Types of Paper and Other Media Plain Paper Thick Paper OHP transparencies Envelopes Paper not supported by this printer Print Area ❖Paper ❖Envelope Page Loading Paper Loading Paper in Tray 1 and the optional paper feed unit Page Changing the paper size D Slide the catches inwards to unlock the tray E Slide the tray until it stops F Return the catches to their original positions Page If you load a paper size that is not selected automatically Specifying custom size paper for the optional paper feed unit Custom Size: Horiz. 8.27 “ Specifying a paper type for paper tray and the optional paper feed unit Loading Paper in the Bypass Tray Opening and Closing the Bypass Tray Open the bypass tray Close the bypass tray Specifying standard size paper for the Bypass Tray B Adjust the side guides to the paper width Bypass Size: *11 x 8 1/2 Specifying custom size paper for the Bypass Tray Specifying a paper type for the Bypass Tray Bypass Tray: Thick Paper Loading Envelopes Loading envelopes onto the Bypass Tray Bypass Size: C5 Env(162x229) Loading envelopes into the Envelope Feeder Unit Page Page Page Switching between Paper Trays Replacing the Toner Cartridge A Open the front cover by pushing the front cover release button B Be sure to put the toner cartridge on a stable, flat surface Page Page Page Replacing the Maintenance Kit Before Replacing Replacing the Friction Pad Page Replacing the Transfer Roller Page Page Replacing the Paper Feed Rollers Page Page Replacing the Fusing Unit Replacing the fusing unit Page Page Page Replacing the fusing unit with the duplex unit attached Page Page Cautions to Take When Cleaning Cleaning the Friction Pad Page Cleaning the Paper Feed Roller Page Page Page Cleaning the Registration Roller Page G Close the front cover by pressing the left and right side indentations Adjusting the Image Density Page Adjusting Tray Registration Adjustment: Horiz: Tray Horiz: Tray 2: (-4.0+4.0) Registration: Adjustment Error & Status Messages on the Control Panel ❖Messages (in alphabetical order) Page Page Page {# Enter} key Form Feed Online Page Page the [Ready] Printer Does Not Print terface cable ❖ Network Connection ❖ Ad hoc Mode or 802.11 Ad hoc Mode ❖ Infrastructure Mode Checking the port connection Windows 95/98/Me Windows Windows XP Professional, Windows Server Windows XP Home Edition Windows NT Other Printing Problems [Maintenance] menu Output are not delivered Check the paper size settings. The size selected with the paper to the selected tray you require [Font Priority] printing speed may decrease, two-sidedprinting may be canceled or a job reset may occur during continuous print ing • If the entire image is not printed out properly even after chang The paper size appears on the control panel and printing is not performed place the indicated size in the paper tray, or perform Form Feed with PDF Direct Print Additional Troubleshooting Page Removing Misfed Paper When “Remove Misfeed Paper Tray” Appears Page When “Remove Misfeed Internal Path” Appears Page F Close the front cover by pressing the left and right side indentations When “Remove Misfeed Paper Exit Cover” Appears Removing misfed paper from the exit cover Removing misfed paper from the fusing unit Page Page Page When “Remove Misfeed Duplex Unit” Appears Removing the misfed paper inside the cover Page Page Page Moving and Transporting the Printer Moving the Printer Moving the printer in the short distance D Lift the printer and move it to the place where you want to install it E If you removed options, reinstall them Consumables Toner Cartridge Maintenance Kit ❖Maintenance Kit Type Page Specifications Mainframe ❖Configuration: ❖Print Process: ❖First Print Speed: ❖Paper size: ❖Paper Weight: ❖Media Type: ❖Power Source: ❖Power Consumption: ❖Weight: ❖Warm-upTime: ❖Paper Capacity: ❖Paper Output Capacity: ❖Memory: Options Paper Feed Unit Type ❖Dimensions (W⋅D⋅H): ❖Paper Size: Envelope Feeder Type Memory Unit Type C 256MB ❖Module Type: ❖Memory Type: ❖Number of Pins: 1394 Interface Unit Type ❖Protocol: ❖Data Transfer Speed: ❖Frequency Range: ❖Transmittable Distance: ❖Transmission Mode: