Control Panel

9.Operation switch (On indicator)

Press to turn the power on. The On indi- cator lights. To turn the power off, press again.

Note

This key is inactivate during scanning or while setting defaults.

Reference

p.15 “Turning On the Power”

10.{Sort}key

Automatically sorts copies.

11.{Lighter}and {Darker}keys

Press to change the image density setting. Select the image density in three incre- ments, Lighter to Darker.

12.{Escape}key

Press to cancel an operation or return to the previous display.

13.{Original Type}key

Press to select the original type registered

 

in [Original Type 1 (Text)] or [Original Type 2

 

(Photo)]. When the original type is select-

1

ed, the corresponding indicator lights.

14. {OK}key

 

Press to set a selected item or an entered numeric value.

15.Number keys

Press to enter numeric values.

16.{#}key

Press to set a selected item or an entered numeric value.

17.{Start}key

Press to start copying, printing, or scanning or sending.

Display

The display panel shows machine status, error messages, and function menus.

Important

A force or impact of more than 30 N (about 3 kgf) will damage the display.
Initial copy display

1

2

3

AAX024S

4

AAI024S

1.Operational status or messages

2.Messages and the selected tray ap- pear here. Currently selected items appear in brackets.

3.Number of copies set.
4.Reduce/Enlarge ratio function for non-fixed ratios.
When you select or specify an item on the display, it is highlighted like.

13