Copying from the Bypass Tray

C Insert the paper with the side you want to copy facing down, and then adjust the paper guide with the paper size.

D Pull down the paper guide release lever (step B).

The bypass tray is selected on the display.

4 1

2 3

ZENY120E

1.Horizontal size2.Vertical size3.Extender4.Paper guides

Note

❒If the guides are not flush against the copy paper, images might be skewed or paper mis- feeds might occur.

❒Do not stack paper over the lim- it mark, otherwise images might be skewed or paper mis- feeds might occur.

❒Swing out the extender to sup-

port paper sizes larger than A4L, 81/2" ⋅ 11"L.

❒Fan paper to get air between the sheets and avoid a multi-sheet feed.

Note

3

❒If [Byp.] is not selected on the display, select [Byp.] using {U} or {T}, and then press the {#} key.

E Select the paper size and type.

When copying onto regular size paper

A Select [Paper Size] using {U} or {T}, and then press the {OK} key.B Select [Regular Size] using {U} or {T}, and then press the {OK} key.

25