Settings You Can Change with User Tools
❖ Paper Type: Bypass tray | ❖ Energy Saver Timer |
Set the display so you can see what type of paper is loaded in the bypass tray.
•The paper types you can set for the bypass tray are as follows:
•recycled paper, special pa- per, colour paper, letterhead, prepunched paper, label pa- per, bond paper, thick paper, OHP, cardstock
Note
❒Default: Thick Paper
❒Paper types you can set in the bypass tray for machines with the copy function only are plain paper, thick paper and OHP.
Timer Settings
❖Auto Off Timer
After a specified period has passed, following job completion, the machine automatically turns off, in order to conserve energy. This function is called “Auto Off”. The machine status after the Auto Off operation is referred to as “Off mode”. For the Auto Off Timer, specify the time to elapse before Auto Off.
Note
❒Default: 1 min.
❒The time can be set from 1 to 240 minutes, using the number keys.
❒From “Off mode”, the machine is ready to use within 10 sec- onds.
❒Auto Off may not work when error messages appear.
The machine automatically enters Low Power mode automatically after a job is finished, and the selected time elapsed.
Note
❒Default: 1 min.
❒The time can be set from 1 to 240 minutes, using the number key.
❒Energy Saver may not work when error messages appear.
❖System Auto Reset Timer
The System Reset setting automat- | 4 |
ically switches the screen to the copier display when no operations are in progress, or when an interrupted job is cleared. This setting determines the system reset inter- val.
Note
❒Default: On, 60 sec.
❒The time can be set from 10 to 999 seconds, using the number keys.
❖Copier Auto Reset Timer
Specify the time to elapse before copier modes reset.
Note
❒If [Off] is selected, the machine does not automatically switch to the user code entry screen.
❒Default: On, 60 sec.
❒The time can be set from 10 to 999 seconds, using the number keys.
39