
Placing Originals
B Select [Custom Size] using {U} or {T}key, and then press the {OK} key.
When the custom size originals settings are registered, appears on the top of copy display.
Note
❒When [Auto Detect] is selected, the size of the placed original will be detected automatically.
C Enter the horizontal size of the original using the number keys, and then press the {OK}key.
Note
❒If you make a mistake, press the {Clear/Stop}key, and then enter the value again.
D Enter the vertical size of the original using the number keys, and then press the {OK}key.
The “Programmed” message appears with your set original size.
2
Note
❒To cancel the size you have set, press the {Clear Modes}key.
Placing regular size originals
A Select the paper tray using {U}or {T} key, and then press the {#} key.
B Select [Regular Size] using {U} or {T}key, and then press the {OK} key.
Note
❒When [Auto Detect] is selected, the size of the placed original will be detected automatically.
21