Copier Functions

 

A Press [R/E].

Preset Reduce/Enlarge

 

 

 

You can select a preset ratio for copy- ing.

B Press [Reduce] or [Enlarge].

3

Base Point

The base point of Reduce/Enlarge differs depending on how the orig- inal is scanned. When the original is placed on the exposure glass, the upper left corner is the base point. When placed in the ADF, the bot- tom left corner is the base point.

C Select a ratio using {U} or {T}, and then press the {OK}key.

The “ Programmed ” message ap- pears.

D Place your originals, and then press the {Start}key.

Zoom

You can change the reproduction ratio in increments of 1%.

GCKA031e

1.Base point when placing on the exposure glass.

2.Base point when placing in the ADF.

Reference

Related default settings

p.43 “Reproduction Ratio”

p.43 “Preset R/E Priority”

Note

You can also select a preset ratio close to the desired ratio using [Re-

duce] or [Enlarge], and then adjust the ratio using {U}or {T}.

29