Placing Originals

Placing Originals

Note

Take care to place originals only af- ter any correction fluid and ink has completely dried. Not taking this precaution could cause marks on the exposure glass that will be cop- ied onto paper.

Reference

For original sizes you can set, see p.17 “Originals” .

Original Orientation

You can set the original orientation in the following ways.

This function is useful for copying torn or large originals.

Note

Originals should normally be aligned to the rear left corner. However, some copy functions may produce different results de- pending on the orientation of the originals. For details, see the expla- nations of each function.

Originals

ADF

Exposure

 

 

 

 

 

 

 

 

 

glass

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

set11EE

set23EE

Placing Originals on the

Exposure Glass

A Lift the exposure glass cover or

 

2

ADF.

 

Important

Do not lift the exposure glass cover or ADF forcefully. If you do, the ADF cover might open or be damaged.

Note

Be sure to lift the exposure glass cover or ADF by more than 30°. Otherwise, the size of the origi- nal might not be detected cor- rectly.

B Place the original face down on the exposure glass. It should be aligned with the rear left corner.

AAI025S

1.Positioning mark2.Left scale

Note

Start with the first page to be copied.

C Lower the exposure glass cover or ADF.

19