User Tools
Accessing User Tools
This section is for key operators in charge of this machine.
User Tools allow you to change or set defaults.
Note
❒Operations for system settings dif- fer from normal operations. Al- ways quit User Tools when you have finished. See p.37 “Quitting User Tools”.
4 ❒ Selected settings are highlighted.
❒Any changes you make with User Tools remain in effect even if the
main power switch or operation switch is turned off, or the {Clear Modes}key is pressed.
B Select [System Settings] or [Copier Features] using {U} or {T}, and then press the {OK}key.
C Select the menu using {U}or {T}, and then press the {OK}key.
Changing Default Settings
Note
❒If a key operator code is already set, the key operator code entry display appears. Enter the key op-
erator code, and then press the {OK} key. See p.40 “Key Operator Code”.
A Press the {User Tools/Counter}key.
| User Tools/Counter | ClearModes |
ABC | DEF | Clear/Stop |
|
|
JKLMNO
Start
TUVWXYZ
APE044S
Reference
p.33 “User Tools Menu ( System
Settings )”p.35 “User Tools
Menu ( Copier Settings )”.
D Select the item using {U}or {T}, and then press the {OK}key.
E Change settings by following instructions on the display, and then press the {OK}key.
Note
❒To cancel changes made to set-
tings and return to the initial display, press the {U s e r Tools/Counter}key.
36